Got A New Faucet Repaired? Here’s How To Prevent Leaks And Clogs

Have you got a new faucet installed or repaired? Well, the job is not over. In keeping your faucet at its best condition and also avoiding it leaking or clogging up again, some useful steps need to be taken. How to care for your faucet to avoid having to repair it later on is what we will be showing in this article. If you are searching for a “plumbing service near me“, this guide will be incredibly helpful to you.

1. Know the Causes of Leaks and Clogs

Before going into the tips of prevention and to know the time when calling a plumbing service near me becomes necessary, it is important to know what generally creates these leaks and clogs in faucets. Generally, the cause of a leak is usually worn-out washers, seals, or O-rings. These could wear out easily over time due to heavy usage, poor installation, or even exposure to hard water. For the clogs, these are usually brought about by the mineral buildup, debris, or residue from soaps and cleaning products accumulated in the faucet’s aerator or pipes.

You will be a little more observant as far as maintaining your faucet is concerned, recognizing early warnings frequently is not OK and calling plumbing service near me is important. This is very vital to prevent any prospective issues in the bud before big issues start to follow.

2. Cleaning and Maintenance Routine

Cleaning your faucet will not only be the easiest and most effective method of preventing leaking or clogging, but taking your time out to clean it will also do the job. Remember that cleaning of the device and its various parts removes the building of dirt, grime, or mineral buildup.

Aerator Cleaning: The aerator is that small screen at the end of your faucet that the water comes out of. After some time, it can build up mineral deposit and debris, which will cause either weak flow or blockage. Unscrew the aerator and then soak it in vinegar for half an hour or so, scrubbing with a toothbrush before reinstalling it.

General Cleaning: Apply a non-abrasive cleaner to wipe down the faucet, concentrating particularly on the areas around the handles and spout, since these areas are prone to soap scum and grime buildup. Harsh chemicals can destroy the finish of the faucet or damage seals and washers.

The regular cleaning will not just keep it looking new but functioning properly, too.

3. Check for Leaks Regularly

Even with a new faucet, leaks need to be checked periodically. Small leaks often go unnoticed but can lead to major water waste and larger issues down the line. The various signs are:

– Drips from the Faucet: Any sort of small drip is indicative of some form of problem and should be dealt with straight away.

– Water Stains or Moisture Under the Sink: One sure sign of a faucet leak will be water stains or moisture under your sink from that same faucet connection.

– Loose Handles: If the handles are loose or wobbly, it might just indicate that internal components are worn or installed incorrectly, which in time could allow leaks to take place.

If you notice some leaks, it is good to consult with a reputable “plumbing service near me” while the problem is still mild.

4. Water Softeners

If you are living in an area with hard water, this could also serve to have mineral deposits building up rather fast inside your faucet, hence leading to a clog that lessens water flow. Installing a water softener may be helpful in ensuring that the mineral content in the water is reduced, avoiding limescale building up, which in turn would keep the faucet running longer.

The water softeners eliminate calcium and magnesium ions in hard water and replace them with sodium or potassium ions. This makes the water less apt to create buildup. This water softener is an invaluable investment to keep not just your faucets but all your plumbing fixtures in good condition.

5. Be Mindful of What Goes Down the Drain

Another easy way of avoiding blockage is being keen on what goes down the sink. Hair, grease, remains of food, and many other scraps block hand basins and drains very fast. Even if your faucet is new, these materials can quickly accumulate in the pipes and cause blockages.

– Install Drain Screens: Drain screens catch all of the hair, food particles, and other waste so it never has the opportunity to enter the plumbing. 

– Avoid Pouring Grease Down the Sink: When grease cools down, it forms together into a big glob, therefore resulting in blockage. Instead, grease needs to be stored in a container and then tossed in the garbage.

– Run Hot Water: Running hot water for a few minutes after using the sink, especially doing dishes, can help to clear out some of the soap scum or other particles that can build up inside the pipes.

By taking these precautions, you go a long way in minimizing blockage risks. Flow from your faucet will be as smooth as silk. 

 

6. Regular Professional Inspections

While regular cleaning and maintenance can go a long way, nothing beats the expertise of a professional plumber. The scheduling of regular inspections with a “plumbing service in Singapore” will help to uncover many issues, big or small, before becoming actual problems. Expert plumbers will be able to survey any hidden leak and the condition of the inner parts of your faucet, among other things, and will advise on further maintenance if necessary.

In Singapore, frequent checks are all the more indispensable since humidity and temperature fluctuations can easily get the better of the plumbing system. Professional plumbers understand the conditions well and can offer effective solutions to keep your faucet and plumbing in top condition.

 

7. Quick Response to Issues

If you observe a hint of the problem-be it with the flow of water, some noise, or tiny leaks-do not wait for it to get worse. Immediately seek a “plumbing service near me” and have this issue addressed. The quicker response regarding plumbing, the more manageable or less costlier the fixing becomes.

For many of these issues, a dripping faucet or an aerator that is somewhat clogged, for example, the fix can often be fast and simple. If left unchecked, however, these minor issues might balloon into much greater destruction, such as water damage to your cabinet or flooring.

Conclusion

A newly repaired faucet is an investment in the comfort and functionality of your home. Still, you can prevent leaks and clogs that may make your faucet wear off for many years by just taking precautions toward its maintenance. If you have got such problems, then calling a plumbing service in Singapore is important. It involves no more than regular cleaning, consideration for proper use, professional inspection, and addressing an issue at once.

Whether you are looking for faucet maintenance advice or plumbing emergency services, a good “plumbing service in Singapore” like Merdeka Contractor is always just around the corner. If one remains vigilant and collaborates with the right kind of professionals, then a smooth and efficient plumbing system of the house is assured.