How To Reset Linksys RE6300 Via Reset Button & Web Interface

John Cena 2 hours ago Technology Leave a comment 5 Views

Is your linksys re6300 creating an issue? Wish to reset your linksys RE6300 range extender device to resolve it but don’t know how. Need not to worry at all, just read out this article. This page will guide you how you can access http//extender.linksys.com page for Linksys RE6300 Reset. In addition, we are also going to specify the button based reset process of linksys extender device. So, without any further discussion, let’s move ahead with the reset steps. In addition to this we also specified how you can again perform linksys re6300 setup using WPS as well as web interface.

Linksys RE6300 Reset Using Web Interface

Resettings the device using http//extender.linksys.com is possible. You just have to walk through the guide we have mentioned here:

First of all you need a wifi enabled device that you can connect with linksys extender network.
Now use ethernet cable or wifi settings to establish the connection with linksys re6300.
As the device connects to the network, go to the web browser you have in it such as google chrome, internet explorer, firefox, safari etc.
Open it and then search for http//extender.linksys.com by entering in address bar
Page will open on the screen where you have to select the “access range extender settings” option.
Now, choose the device model “RE6300” from the further opened page.
Next you need to enter the admin password to proceed with the access.
Hit on the login option and you will get the access.
To go further with the reset process you need to open settings and then the administration section from the appeared column.
Look there for the factory default option and click on it.
Further choose the reset button to begin the reset linksys re6300 device.
Go with the on screen guide, wait till the reset completes and again configure your linksys range extender.

Linksys RE6300 Reset Using Reset Button

To proceed the linksys re6300 reset using reset button is a very simple process. You don’t need any additional device to complete this method reset.

First of all you need to turn the device power on by connecting it to a power outlet.
Next step of the process is to locate the reset button on your linksys re6300 device.
You are required to hit the reset button, hold it for 5 to 10 seconds & thereafter release it.
As you do, the device LED starts blinking to indicate the reset is in process.
Wait till the linksys re6300 reset completes and then you can again configure your linksys range extender.

Remember, resetting the device means erasing the complete settings you made. To get the device back on your home/ office network then you have to proceed with linksys RE6300 setup steps as mentioned underneath.

Linksys RE6300 Setup

Linksys RE6300 setup can be done by using web interface & WPS button. WPS button based process is very simple. You just need to press the button on your linksys extender and the router with which you desire to connect it. Although the steps to move ahead with http//extender.linksys.com web interface is mentioned underneath:

Turn your re6300 range extender device on by connecting it to the power.
Connect the computer or laptop you are about to use for the process to the linksys range extender network.
This connection is mandatory to access http//extender.linksys.com web portal.
Open the browser & search for the portal by entering the address in the address bar.
Now, login to the web interface by using the default login information after choosing “setup range extender” option
Once you get the access to the linksys RE6300 range extender settings, you can proceed with the setup.
Setup wizard will guide you with the steps you have to follow
Next you have to choose your home network SSID with which you look to connect your linksys extender.
Provide the password of your current networking device and then choose the connect option.
Once the connection between the two completes successfully, you can move further with the security settings.
Create a password for your range extender WiFi network and save it.
Next you have to check for the firmware update. In case any update is available then you need to run it first.
Lastly you have to click on the apply option to complete the changes.

Conclusion

In the crux of the above description we have concluded that Both the methods of Linksys RE6300 Reset are simple. You can accomplish the reset by using either the web interface or the physical reset button, depending on your preference and the issue at hand. The web interface method is accessible via http://extender.linksys.com. You can complete the reset as per your choice by following the above mentioned steps but remember, it will erase all the settings you have made to the device including firmware. In other words, your device will restore the factory default settings.

Setting up your Linksys RE6300 Wi-Fi range extender is simple and helps boost your network coverage. Start by plugging the extender into a power outlet near your router. Connect to the RE6300’s default Wi-Fi network on your computer or smartphone. Open a browser and go to http://extender.linksys.com to access the setup page. Follow the easy on-screen instructions to connect the extender to your home Wi-Fi network. Once connected, the RE6300 will amplify your signal, eliminating dead zones and improving connectivity in your home. Enjoy better coverage and faster speeds throughout your space!

Once linksys re6300 reset is done, you have to connect the device afresh to use it. Connecting the device again will lead to following Linksys RE6300 Setup steps once again. You can enjoy high speed internet once again in every corner of your home.